Impulse & Click Test – Room Echo and Speaker Timing Check

Clicks and echoes
40%

Ready

Good to knowTips
  • Start quiet, raise slowly
  • Check L/R markings first
  • Disable audio enhancements
PrivateStays on device
  • Runs inside your browser
  • No upload, no account
  • Nothing saved after you close

Impulse response and click test

An impulse is the shortest possible sound. Listening to how it decays reveals your room’s echo, flutter between parallel walls and ringing in speakers.

What an impulse reveals

A perfect system turns a click into a click.

Flutter echo

Hard parallel walls bounce sound back and forth, creating a metallic zing after a click.

Speaker ringing and timing

Resonant cabinets and some filters keep ringing after the impulse.

How to test

How to Use the
Impulse Test

  1. 01

    Room

    stand where you normally listen.

  2. 02

    Click

    play single clicks and listen to the tail after each.

  3. 03

    Echo

    a buzzing or ringing tail means flutter echo between parallel walls.

  4. 04

    Compare

    try left, right and inverted clicks.

What an impulse reveals

A perfect system turns a click into a click. Rooms add reflections, so the click becomes a short burst followed by a decaying tail. Engineers record this tail to calculate reverberation time.

Flutter echo

Hard parallel walls bounce sound back and forth, creating a metallic zing after a click. A bookshelf, rug or curtain on one wall usually cures it.

Speaker ringing and timing

Resonant cabinets and some filters keep ringing after the impulse. Alternating left and right clicks also help confirm that both speakers are equally distant: the clicks should sound equally sharp and loud.

Full-range signals

Other full-range signals

Pink noise and sweeps complement impulses: noise for level, sweeps for response, clicks for timing.

Related guides and fixes

Frequently Asked Questions

Q.Can I measure reverberation time here?

Only by ear. Use the recorder to capture clicks and inspect the decay in an audio editor.

Q.Why does the click sound different on each side?

Different distances, reflections or speaker damage.

Q.Is the click loud?

It is brief but sharp; keep the volume moderate.

Back to all sound tests